1.User Manual:
SOM-IMX8M-MINI_Hardware_User_Manual-v1.1.pdf
SBC-IMX8MM Software User Manual.pdf
SBC-IMX8MM Quick Operation Guide.pdf
2.Connectors:
3.System Image
https://www.jianguoyun.com/p/DVy5wTcQ7L_aCRix6roEIAA (Password：x3NRA3)
4.Complier Chain And Tools
https://www.jianguoyun.com/p/DaLkZ3kQ7L_aCRjE6roEIAA (Password：rDs8jL)
5.Uboot/Kernel/Rootfs Source code
https://www.jianguoyun.com/p/DSmuyRwQ7L_aCRjLusEEIAA (Password : 92wg54)
https://www.jianguoyun.com/p/Daf5CkcQ7L_aCRi86roEIAA (Password：Jv0AqA)
6.Ready Made Yocto Complier Enviroment(Up tp 320GB)
Contact：sales@emtop-tech.com
1 Feature:
- CPU:NXP i.MX8M MINI
- 4xARM Cortex-A53@1.8GHZ
- 1xCortex-M4@400MHZ
- Memory:Support Up to 4GB DDR4
- Onboard 2GB DDR4
- Flash:Support Up to 64GB eMMC
- Onboard 16GB EMMC
- I/O: PCIe, 2x USB, RGMII, 2x SD, 4x UART, 77x GPIO
- Ethernet:Onboard Dualband WIFI/BT5.1(Options),1x10/100/1000M Phy
2.Hardware Specification
Feature | Details |
i.MX8M MINI SOC | |
Arm Cortex-A53 MPCore platform | Quad symmetric Cortex-A53 processors, including: • 32 KB L1 Instruction Cache • 32 KB L1 Data Cache • Media Processing Engine (MPE) • Floating Point Unit (FPU) Support of 64-bit Armv8-A architecture • 512 KB unified L2 cache • Target frequency of 1.8GHz |
Arm Cortex-M4 core platform | • 16 KB L1 Instruction Cache • 16 KB L1 Data Cache • 256 KB TCM |
Graphic Processing Unit (GPU) | • GC NanoUltra frequency up to 800 MHz • OpenGL ES 2.0 • 2D GC520L |
Video Processing Unit (VPU) | • VP9,VP8,AVC,H.265,H.264 decoder • VP8, AVC,H.264 encoder |
Audio | • S/PDIF Input and Output • SAI modules supporting I2S,AC97,TDM |
On-chip memory | • Boot ROM (256KB) • On-chip RAM (256KB + 32KB) |
Memory and storage | |
DDR SDRAM | • 2GB DDR4 SDRAM (32-bit bus width) • 1200MHz maximum DDR clock • Interfaces directly to the iMX8M MIPI build-in DDR controller |
eMMC | • 16GB NAND eMMC flash memory • 8-bits MMC mode • Conforms to JEDEC version 5.0 and 5.1 |
SPI Flash | • 64M bit SPI flash memory • 104MHz Single, Dual/Quad SPI clocks • More than 100,000 erase/program cycles • More than 20-year data retention |
Expandable flash (MicroSD) | • Meets SD/SDIO 3.0 standard Runs at 4-bits • Supports system boot from SD card |
Network & Wireless | |
Ethernet | • On-board 10/100/1000 Mbps Ethernet PHY |
Wi-Fi | AzureWave AW-CM256SM module: • Wi-Fi 1x1 (802.11a/b/g/n/ac 2.4/5GHz) • SDIO 3.0 • High speed wireless connection up to 433.3Mbps |
Bluetooth | AzureWave AW-CM256SM module: • Bluetooth 5.0 (supports Bluetooth low-energy) • High-speed UART • PCM audio |
Hardware Interface | |
I/O connectivity | • 1x single lane PCI Express Gen 2 • 2x USB2.0 OTG with integrated PHY • 1x SDIO supporting MMC 5.1, SDIO 3.01 • 1x Gigabit Ethernet with integrated PHY • 3x UART • 3x I2C • 2x ESPI |
Display Interfaces | • 4-lane MIPI DSI interface |
Camera | • 4-lane MIPI CSI interface |
3.Software Specification
Names | Note | Formats | |
BOOTLOADER | U-BOOT | MMC/SD | Source Code |
FAT | Source Code | ||
NET | Source Code | ||
KERNEL | LINUX-5.4 | Support ROM/CRAM/EXT4/FAT/NFS various of file system | Source Code |
DEVICE DRIVER | SERIAL | Serials driver | Source Code |
RTC | Hardware RTC driver | Source Code | |
NET | 10/100M/1000M Ethernet driver | Source Code | |
CAN | CAN bus driver | Source Code | |
SPI | SPI driver | Source Code | |
SPI FLASH | SPI Flash driver | Source Code | |
I2C | I2C driver | Source Code | |
LCD | MIPI-DSI driver | Source Code | |
TOUCH SCREEN | I2C Resistive touch panel driver | Source Code | |
MMC/SD | MMC/SD controller driver | Source Code | |
USB OTG | USB OTG driver | Source Code | |
AUDIO | Audio driver (supports audio recording and playback) | Source Code | |
AUDIO SPDIF | SPDIF interface, playback | Source Code | |
BUTTON | GPIO button driver | Source Code | |
LED | LED driver | Source Code | |
BUZZER | Buzzer driver | Source Code | |
WIFI | SDIO WIFI dongle driver | Source Code | |
ROOTFS | YOCTO | Weston with Qt & Opencv | Image |
